Tungaloy AH8015 carbide grade — ISO 513 groups, coating and cross references
Grade identification
| Manufacturer | Tungaloy |
|---|---|
| Grade designation | AH8015 |
| Catalogue description | AH8015 / PVD, M01-M20 / S10-S20, first choice heat-resistant alloy |
| ISO 513 workpiece groups | M / S |
| Coating family | PVD |
| Substrate | tough substrate |
| Source | Tungaloy — ISO-EcoTurn turning grades and application ranges · accessed 2026-09-28 |
Source: Tungaloy official catalogue, accessed 2026-09-28. Grade behaviour statements on this page are general ISO 513 engineering guidance, not manufacturer cutting data.
ISO 513 fit
Tungaloy AH8015 is filed under ISO 513 groups M and S. Multi-group grades cover a window of workpiece materials — check the manufacturer's application band for the exact position within each group. See the group pages under ISO 513 material groups for what each letter means in practice.
Offered on these inserts
Cross-brand grade equivalents
Equivalents are listed only when they can be traced to a published cross-reference chart or confirmed in both manufacturers' official catalogues. Unconfirmed chart rows are marked VERIFY; nothing on InsertBase is guessed.
| Equivalent grade | Brand | Match | ISO 513 | Coating | Basis / note | Source |
|---|---|---|---|---|---|---|
| 1205 | Sandvik Coromant | PARTIAL | M / S | PVD | PVD M01-M20 / S10-S20 first choice heat-resistant alloy; same M+S. | TaeguTec — Grade Comparison Table (turning grades across 12 manufacturers) (2026-09-28) |
| 2035 | Sandvik Coromant | PARTIAL | M | PVD | PVD M01-M20 / S10-S20; same M group and PVD. | TaeguTec — Grade Comparison Table (turning grades across 12 manufacturers) (2026-09-28) |
Match levels: FULL = same ISO group, application band and coating family · PARTIAL = same band, different coating or edge prep · VERIFY = quoted in aftermarket charts, unconfirmed by both catalogues.