Kennametal KCK15 carbide grade — ISO 513 groups, coating and cross references
Grade identification
| Manufacturer | Kennametal |
|---|---|
| Grade designation | KCK15 |
| Catalogue description | KCK15 / for Cast Iron |
| ISO 513 workpiece group | K |
| Coating family | Pending catalogue verification |
| Substrate | carbide |
| Source | Kennametal catalogue — WNMG080412UN KCK15 · accessed 2026-09-28 |
Source: Kennametal official catalogue, accessed 2026-09-28. Grade behaviour statements on this page are general ISO 513 engineering guidance, not manufacturer cutting data.
ISO 513 fit
Kennametal KCK15 is filed under ISO 513 group K. Check the manufacturer's application band for the exact position within the group. See the group pages under ISO 513 material groups for what each letter means in practice.
Offered on these inserts
The manufacturer offers grade KCK15 on the following catalogued geometries. Each row cites the official product record.
Cross-brand grade equivalents
Equivalents are listed only when they can be traced to a published cross-reference chart or confirmed in both manufacturers' official catalogues. Unconfirmed chart rows are marked VERIFY; nothing on InsertBase is guessed.
| Equivalent grade | Brand | Match | ISO 513 | Coating | Basis / note | Source |
|---|---|---|---|---|---|---|
| 4415 | Sandvik Coromant | PARTIAL | K / P | CVD | KCK15 CVD wear-resistant cast iron grade. | FM Carbide — carbide grade cross-reference (16 brands) (2026-09-28) |
Match levels: FULL = same ISO group, application band and coating family · PARTIAL = same band, different coating or edge prep · VERIFY = quoted in aftermarket charts, unconfirmed by both catalogues.