SECO Tools Inserts & Grades on InsertBase
SECO Tools
Sweden · manufacturer brand
0
models with cited offers
0
catalogued ordering codes
10
carbide grades
6/10
grades with cross-brand mappings
2
catalogue source records
ISO 513 workpiece groups covered by catalogued grades: HKMNPS
SECO Tools is a trademark of its owner. InsertBase is an independent reference site and is not an authorised distributor; brand names are used for identification and cross-reference only. Every row below links to the official catalogue record it was extracted from.
Carbide grades catalogued (10)
| Grade | ISO 513 | Coating | Substrate | Offered on |
|---|---|---|---|---|
| CP200 CP200 / PVD for stainless and superalloys |
M / S | PVD | tough substrate | 0 models |
| CP500 CP500 / PVD multi-material general turning grade |
P / M / K / N / S / H | PVD | tough substrate | 0 models |
| CP600 CP600 / PVD for stainless and superalloy finishing |
M / S | PVD | hard substrate | 0 models |
| TP1000 TP1000 / CVD steel high-speed finishing |
P | CVD | hard substrate | 0 models |
| TP15 TP15 / CVD Duratomic steel finishing |
P | CVD | hard substrate | 0 models |
| TP2000 TP2000 / CVD steel general turning |
P | CVD | tough substrate | 0 models |
| TP25 TP25 / CVD Duratomic all-purpose steel, stainless, cast iron and superalloy turning |
P / M / K / S | CVD | tough substrate | 0 models |
| TP2500 TP2500 / CVD Duratomic general steel and cast iron |
P / K | CVD | tough substrate | 0 models |
| TP35 TP35 / CVD Duratomic heavy interrupted steel turning |
P | CVD | very tough substrate | 0 models |
| TP3500 TP3500 / CVD Duratomic heavy steel turning |
P | CVD | very tough substrate | 0 models |
Catalogued insert offers (0)
Manufacturer ordering codes as published in the official catalogue, each linked to the ISO 1832 model page and its source record.
| ISO model | SECO Tools ordering code | Chipbreaker | Grade | ISO 513 | Source |
|---|