Mitsubishi Materials Inserts & Grades on InsertBase
Mitsubishi Materials
Japan · manufacturer brand
0
models with cited offers
0
catalogued ordering codes
15
carbide grades
9/15
grades with cross-brand mappings
2
catalogue source records
ISO 513 workpiece groups covered by catalogued grades: KMPS
Mitsubishi Materials is a trademark of its owner. InsertBase is an independent reference site and is not an authorised distributor; brand names are used for identification and cross-reference only. Every row below links to the official catalogue record it was extracted from.
Carbide grades catalogued (15)
| Grade | ISO 513 | Coating | Substrate | Offered on |
|---|---|---|---|---|
| NX2525 NX2525 / coated cermet for steel finishing |
P | — | cermet | 0 models |
| NX3035 NX3035 / coated cermet for steel general turning |
P | — | cermet | 0 models |
| UC5105 UC5105 / CVD TiCN-Al2O3 cast iron high speed |
K | CVD | hard substrate | 0 models |
| UC5115 UC5115 / CVD TiCN-Al2O3 cast iron general turning |
K | CVD | tough substrate | 0 models |
| UC6010 UC6010 / CVD TiCN-Al2O3-TiN steel turning |
P | CVD | tough substrate | 0 models |
| UE6005 UE6005 / CVD TiCN-Al2O3-TiN steel high speed |
P | CVD | hard substrate | 0 models |
| UE6020 UE6020 / CVD TiCN-Al2O3-Ti compound general steel and stainless |
P / M | CVD | tough substrate | 0 models |
| UE6035 UE6035 / CVD TiCN-Al2O3-TiN heavy interrupted steel turning |
P | CVD | very tough substrate | 0 models |
| UE6105 UE6105 / CVD TiCN-Al2O3-Ti compound steel finishing |
P | CVD | hard substrate | 0 models |
| UE6110 UE6110 / CVD TiCN-Al2O3-Ti compound general steel turning |
P | CVD | tough substrate | 0 models |
| UH6400 UH6400 / CVD TiCN-Al2O3-Ti compound heavy steel turning |
P | CVD | very tough substrate | 0 models |
| US7020 US7020 / CVD TiCN-Al2O3-TiN stainless steel turning |
M | CVD | tough substrate | 0 models |
| US735 US735 / thin multi-layer Ti compound stainless finishing |
M | CVD | tough substrate | 0 models |
| US905 US905 / CVD TiCN-Al2O3 stainless high speed |
M | CVD | hard substrate | 0 models |
| VP15TF VP15TF / PVD AlTiN general turning for steel and stainless |
P / M / S | PVD | tough substrate | 0 models |
Catalogued insert offers (0)
Manufacturer ordering codes as published in the official catalogue, each linked to the ISO 1832 model page and its source record.
| ISO model | Mitsubishi Materials ordering code | Chipbreaker | Grade | ISO 513 | Source |
|---|