TaeguTec CT3000 carbide grade — ISO 513 groups, coating and cross references
Grade identification
| Manufacturer | TaeguTec |
|---|---|
| Grade designation | CT3000 |
| Catalogue description | CT3000 / cermet, steel P finishing |
| ISO 513 workpiece group | P |
| Coating family | Pending catalogue verification |
| Substrate | cermet |
| Source | TaeguTec — Turning insert selection guide (grade application ranges) · accessed 2026-09-28 |
Source: TaeguTec official catalogue, accessed 2026-09-28. Grade behaviour statements on this page are general ISO 513 engineering guidance, not manufacturer cutting data.
ISO 513 fit
TaeguTec CT3000 is filed under ISO 513 group P. Check the manufacturer's application band for the exact position within the group. See the group pages under ISO 513 material groups for what each letter means in practice.
Offered on these inserts
No published insert record on InsertBase offers grade CT3000 yet. It will be linked automatically once the corresponding geometry is catalogued with a source.
Cross-brand grade equivalents
Equivalents are listed only when they can be traced to a published cross-reference chart or confirmed in both manufacturers' official catalogues. Unconfirmed chart rows are marked VERIFY; nothing on InsertBase is guessed.
No verified cross-brand equivalents for TaeguTec CT3000 are published here yet. Rather than guess, request a mapping through the inquiry box on any model page — verified matches are returned with sources.