9.525 × 3.18 × 0.8 mm inserts
Indexable turning inserts whose three key dimensions coincide: inscribed circle d1 = 9.525 mm (0.375 in), thickness s = 3.18 mm (0.125 in), nose radius rε = 0.8 mm (0.031 in). This is the dimension set behind an “equivalent insert” search — read the interchange note before substituting.
2 designations across 2 insert shapes (C, S) share these dimensions.
Equal d1, s and rε alone do not make inserts interchangeable: shape and clearance must match too — a 60° triangular insert and a 55° rhombic insert at the same dimensions cut completely different profiles and seat in different holders. Rows below are grouped by shape; true geometric interchange applies within the same ISO core code across brands, as shown on each model page.
Models at this dimension set
| Model | Shape | Clearance | Tolerance / fixing | Brand offers | |
|---|---|---|---|---|---|
| CNMG090308 | C 80° rhombic | N · 0° | MG | 6 | Specs → |
| SNMG090308 | S 90° square | N · 0° | MG | pending | Specs → |
Every value on this page is derived deterministically from the ISO 1832 designation (positions 1–7). Brand ordering codes, chipbreakers and grades with cited sources appear on each linked model page.